The hammer mill is also known as the hammer crusher. It is a very important machine in industries that require size reduction operations. The materials are fed into the mill and are crushed by the collision with beaters that are revolving at extremely high speeds. The hammer mill is used to crush materials of different hardness. It normally produces a compressive pressure as high as 100Mpa depending on the water ratio. This mill is simple in structure and principle but very efficient when dealing with both dry and wet operations. The hammer mill spare parts include rotor, cabinet, hammer, counter lining and sieve. The main parts of the mill are the hammers or the beaters. The spindle, disk and pin are also major component. There are many industries that use this mill in their manufacturing process.
The advantage of using this mill is that it is a one-time investment. In addition to that, it has a low operation cost and very efficient in what it does. You will also get spare parts that will ensure the operation of the machine is not hindered. You will get a heavy-duty rotor design that has undergone testing to ensure it is high quality. The beaters that are used have underwent a casting process that ensures the beaters are resistant to impact and wear. The bearing block forms an integral steel structure. The structure will be sealed completely to minimize dust pollution in the industries. You can therefore be assured that there will be no leakages from the machine. You will choose the type of hammer mill and spare parts depending on the industrial application that you have in mind. There are so many variations and each are meant for specific applications. Ensure that you carry out the necessary research before buying the mill on the internet.